| [機械工程學系] 研究計畫 |
2025-07-31 |
機器學習分析RF氮化鋁薄膜製程中的Arcing異常及史密斯圓應用優化;Machine Learning Analysis of Arcing Anomalies in Rf Aluminum Nitride Thin Film Processing and Optimization of Smith Chart Applications |
傅尹坤 |
 |
| [機械工程學系] 研究計畫 |
2024-09-27 |
特徵選擇方法和機器學習應用於RF氮化鋁薄膜製造之原位光譜診斷系統;Validation of an In-Situ Oes Spectral Diagnostic System for Rf Aluminum Thin Film Manufacturing via Feature Selection Methods and Machine Learning |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2023-07-17 |
基於電漿資訊之虛擬計量系統應用於半導體氮化鋁薄膜品質預測;Application Plasma Information Vi Rtual Metrology (Pi-Vm) Based System for Quality Prediction of Semiconductor Aluminum Nitride Thin Films |
傅尹坤; 利定東 |
|
| [機械工程學系] 研究計畫 |
2021-12-21 |
結合仿生奈米結構與三維堆疊奈米纖維製作壓電靜電混能式自供電感測器與量化數據深度學習演算法建置應用(生醫工程：中風病患步態監控、妥瑞氏患者智慧口罩及人機介面智慧鍵盤);Hybridization of 3d Stacked Piezoelectric Nanofibers and Biomimetic-Textured Triboelectric Layers as Self-Powered Sensors for Developing the Large Scale Data Deep Learning Algorithms |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2021-12-21 |
微創外科手術精密輪廓度刀具鍛造製程及模具開發;Forging Process and Mold Development of Contour Cutter for Minimally Invasive Surgery |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2020-01-13 |
結合仿生奈米結構與三維堆疊奈米纖維製作壓電靜電混能式自供電感測器與量化數據深度學習演算法建置應用(生醫工程：中風病患步態監控、妥瑞氏患者智慧口罩及人機介面智慧鍵盤);Hybridization of 3d Stacked Piezoelectric Nanofibers and Biomimetic-Textured Triboelectric Layers as Self-Powered Sensors for Developing the Large Scale Data Deep Learning Algorithms |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2020-01-13 |
開發具高熱導係數之新型異質接面Percolation奈米結構之熱介面材料與IGBT熱管理應用研究;Development of High Thermal Conductivity Thermal Interface Materials (Tims) with the Novel Percolation Nano-Structure and Application to Igbt Thermal Management |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2020-01-13 |
醫療器具精密冷間成型製程開發(殘餘應力極小化)與模具合理化分析;Product Development of Medical Device by Precision Metal Forming and Mold Rationalization Analysis(Minimal Resist Stresss) |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2019-02-21 |
開發具高熱導係數之新型異質接面Percolation奈米結構之熱介面材料與IGBT熱管理應用研究;Development of High Thermal Conductivity Thermal Interface Materials (Tims) with the Novel Percolation Nano-Structure and Application to Igbt Thermal Management |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2018-12-19 |
具精密齒型電纜鉗精密複合鍛造製程及模具開發( II );Development of Precision Forging Process and Mold Design for High Value-Added Gear-Type Cable Clamp( II ) |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2018-12-19 |
近場電紡織技術製作可撓與高透明之無電池式物聯網感測器;Near-Field Electrospun Fiber-Based Highly Stretchable and Transparent Batteryless Iot Sensors |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2018-12-19 |
開發具高熱導係數之新型異質接面Percolation奈米結構之熱介面材料與IGBT熱管理應用研究;Development of High Thermal Conductivity Thermal Interface Materials (Tims) with the Novel Percolation Nano-Structure and Application to Igbt Thermal Management |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2018-08-01 |
近場電紡織技術製作可撓與高透明之無電池式物聯網感測器 ;Near-Field Electrospun Fiber-Based Highly Stretchable and Transparent Batteryless Iot Sensors |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2018-02-01 |
具精密齒型電纜鉗精密複合鍛造製程及模具開發( II ) ;Development of Precision Forging Process and Mold Design for High Value-Added Gear-Type Cable Clamp( II ) |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2017-08-01 |
具精密齒型電纜鉗精密複合鍛造製程及模具開發( I ) ;Development of Precision Forging Process and Mold Design for High Value-Added Gear-Type Cable Clamp( I ) |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2016-08-31 |
近場電紡織技術製作可撓與高透明之無電池式物聯網感測器;Near-Field Electrospun Fiber-Based Highly Stretchable and Transparent Batteryless Iot Sensors |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2016-08-31 |
精密成型模具製程模擬及模具合理化分析;Analysis of Process Simulation and Rationalization of Precision Forming Dies |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2016-03-29 |
利用近場電紡織技術製作高透明、可撓式奈米發電機，應用於主動式傳感器、復健形變偵測器;Near-Field Electrospun Fiber-Based Highly Stretchable and Transparent Energy Harvester for Piezoelectric Nanogerator, Self-Powered Sensors of Human Motion Detection Applications. |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2016-03-29 |
鍍膜提升切刃耐磨性及銳利性研究;Wear and Sharpness Improvement for the PVD Coating of Hand Tools |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2015-01-08 |
適應性光學系統應用於航太級輕合金(鋁、鈦合金)之線上即時粗糙度量測系統及低成本液體透鏡整合應用;Application of Adaptive Optics (AO) in Aerospace Light Metals (Aluminum & Titanium Alloys) In-situ Surface Roughness Measurement and Development of Low-Cost AO-Assisted Liquid Lens |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2013-12-01 |
塑膠熱成形應用於84吋及更大尺寸之液晶電視機殼開發研究;Application of Thermal Forming Process in Manufacturing Frame of 84” and Larger Size for LCD TV Set |
傅尹坤; 李雄 |
|
| [機械工程學系] 研究計畫 |
2013-12-01 |
適應性光學系統於光機電工程之應用—線上即時粗糙度量測系統及輔助光遮蔽器之液體透鏡;Application of Adaptive Optics(AO) in Opto-Mechatronics Systems-- In-Situ Surface Roughness Measurement and AO-Assisted Liquid Lens Shutters |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2012-12-01 |
利用近場電紡絲之犧牲模版技術製作奈米流道，並應用於單分子檢測及開發低成本奈米流道陣列之奈米發電機系統;Fabrication of Monolithic Polymer Nanofluidic Channels via Near-Field Electrospun Nanofibers as Sacrificial Templates and Applications to Single Molecule Detection and Pressure-Driven Nanogenerators |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2012-12-01 |
超塑成型應用於釩電池金屬雙極板微流道製作;Super-plastic forming of metallic bipolar plates microchannel for vanadium redox battery |
傅尹坤; 李雄 |
|
| [機械工程學系] 研究計畫 |
2012-09-01 |
利用近場電紡絲之犧牲模版技術製作奈米流道，並應用於單分子檢測及開發低成本奈米流道陣列之奈米發電機系統;Fabrication of Monolithic Polymer Nanofluidic Channels via Near-Field Electrospun Nanofibers as Sacrificial Templates and Applications to Single Molecule Detection and Pressure-Driven Nanogenerators |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2010-12-01 |
微機電整合技術製作毫米波感測元件暨系統; Integrated Manufacturing for Millimeter-Wave Sensing Systems |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2010-08-01 |
塑膠封裝整合技術製作低成本壓電式自我發電裝置; Low-Cost Piezoelectric Energy Harvesters with Integrated Plastic Packages |
傅尹坤 |
|
| [機械工程學系] 研究計畫 |
2010-01-01 |
微機電整合技術製作毫米波感測元件暨系統; Integrated Manufacturing for Millimeter-Wave Sensing Systems |
傅尹坤 |
|
| [機械工程學系] 期刊論文 |
2016-12-01 |
Near field sequentially electrospun three-dimensional piezoelectric fibers arrays for self-powered sensors of human gesture recognition |
傅尹坤; Fuh, Yiin Kuen; Wang, Bo Sheng |
|
| [機械工程學系] 期刊論文 |
2016-10-01 |
Screen-printed nanostructured composites as thermal interface materials for insulated gate bipolar transistors heat dissipation applications |
傅尹坤; Chang, Tien-Chan; Fuh, Yiin-Kuen; Lee, Rui-Zhong; Li-Yuan, Liu; Lee, Yueh-Mu |
|
| [機械工程學系] 期刊論文 |
2016-09-22 |
All-fiber transparent piezoelectric harvester with a cooperatively enhanced structure |
傅尹坤; Fuh, Yiin-Kuen; Ho, Hsi-Chun; Wang, Bo-Sheng; Li, Shan-Chien |
|
| [機械工程學系] 期刊論文 |
2016-07-03 |
Mechanically tunable aspheric lenses via additive manufacture of hanging elastomeric droplets for microscopic applications |
傅尹坤; Fuh, Yiin-Kuen; Chen, Pin-Wen; Lai, Zheng-Hong |
|
| [機械工程學系] 期刊論文 |
2016-06-01 |
Thermal management and performance evaluation of a dual bi-directional, soft-switched IGBT-based inverter for the 1st autonomous microgrid power system in Taiwan under various operating conditions |
傅尹坤; Chang, Tien-Chan; Fuh, Yiin-Kuen; Lu, Hong-Yi; Tu, Sheng-Xun |
|
| [機械工程學系] 期刊論文 |
2016-05-01 |
The control of cell orientation using biodegradable alginate fibers fabricated by near-field electrospinning |
傅尹坤; Fuh, Yiin-Kuen; Wu, Yun-Chung; He, Zhe-Yu; Huang, Zih-Ming; Hu, Wei-Wen |
|
| [機械工程學系] 期刊論文 |
2016-04-13 |
A Transparent and Flexible Graphene-Piezoelectric Fiber Generator |
傅尹坤; Fuh, Yiin Kuen; Kuo, Chien Cheng; Huang, Zih Ming; Li, Shan Chien; Liu, En Rui |
|
| [機械工程學系] 期刊論文 |
2016-02-01 |
Adaptive optics assisted in-process monitoring system of surface roughness of titanium Ti-GR-2 |
傅尹坤; Lai, Zheng-Hong; Fuh, Yiin-Kuen; Chen, Pin-Wen |
|
| [機械工程學系] 期刊論文 |
2016-02-01 |
Effect of rotationally moving surface on roughness measurement of sputtered Pt film with close-loop correction using adaptive optics |
傅尹坤; Fuh, Yiin Kuen; Wang, Chia-He; Huang, Chieh-Tse; Chen, Pin-Wen; Lai, Zheng-Hong |
|
| [機械工程學系] 期刊論文 |
2016-02-01 |
The combination of rolling-and-T6-treatments with Al2O3-reinforcingparticles effect on A6061 metal-matrix composites |
傅尹坤; Leu, Jyh-Shyan; Chu, Chun-Lin; Fuh, Yiin-Kuen; Huang, E-Wen; Lin, Kin-Fu; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2016-01-29 |
Highly flexible self-powered sensors based on printed circuit board technology for human motion detection and gesture recognition |
傅尹坤; Fuh, Yiin-Kuen; Ho, Hsi-Chun |
|
| [機械工程學系] 期刊論文 |
2015-11-01 |
Effect of welding sequence of a multi-pass temper bead in gas-shielded flux-cored arc welding process: hardness, microstructure, and impact toughness analysis |
傅尹坤; Ling, Kuo-Hsia; Fuh, Yiin-Kuen; Kuo, Tin-Chun; Xun-Tu, Sheng |
|
| [機械工程學系] 期刊論文 |
2015-10-02 |
Flow stress behaviour of ABS (acrylonitrile–butadiene–styrene) at elevated temperature and application to the thermal vacuum forming process |
傅尹坤; Fuh, Yiin-Kuen; Lee, Shyong; Chu, Chun-Lin |
|
| [機械工程學系] 期刊論文 |
2015-10-01 |
Capacitive effective thickness of a few nanometers by atomic layer deposition and device performance in Ge gate-all-around fin field effect transistors |
傅尹坤; Chu, Chu-Lin; Chen, Bo-Yuan; Fuh, Yiin-Kuen |
|
| [機械工程學系] 期刊論文 |
2015-08-24 |
Novel dual-function lens with microscopic and vari-focus capability incorporated with an aberration-suppression aspheric lens |
傅尹坤; Fuh, Yiin-Kuen; Chen, Pin-Wen |
|
| [機械工程學系] 期刊論文 |
2015-08-12 |
Hybrid Energy Harvester Consisting of Piezoelectric Fibers with Largely Enhanced 20 V for Wearable and Muscle-Driven Applications |
傅尹坤; Fuh, Yiin-Kuen; Ye, Jia-Cheng; Chen, Po-Chou; Ho, Hsi-Chun; Huang, Zih-Ming |
|
| [機械工程學系] 期刊論文 |
2015-08-03 |
All-direction energy harvester based on nano/micro fibers as flexible and stretchable sensors for human motion detection |
傅尹坤; Fuh, Yiin-Kuen; Chen, Po-Chou; Ho, Hsi-Chun; Huang, Zih-Ming; Li, Shang-Cian |
|
| [機械工程學系] 期刊論文 |
2015-06-18 |
Groove configurations of a flux-cored arc welding process used in critical structures of precision mechanical presses—mechanical and metallurgical studies |
傅尹坤; Ling, Kuo-Hsia; Fuh, Yiin-Kuen; Wu, Kun-Ling; Kuo, Tin-Chun; Huang, Chung-Yu |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Application of graphite nanoplatelet-based and nanoparticle composites to thermal interface materials |
傅尹坤; Chang, Tien-Chan; Fuh, Yiin-Kuen; Tu, Sheng-Xun; Lee, Yueh-Mu |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Characterization of electrically tunable liquid lens and adaptive optics for aberration correction |
傅尹坤; Fuh, Yiin-Kuen; Chen, Jui-Kuan; Chen, Pin-Wen |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Interfacial characterization of nickel-yttria-stabilized zirconia cermet anode/interconnect joints with Ag-Pd-Ga active filler for use in solid-oxide fuel cells |
傅尹坤; Chao, Chih-Long; Chu, Chun-Lin; Fuh, Yiin-Kuen; Hsu, Ray-Quen; Lee, Shyong; Cheng, Yung-Neng |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Self-powered sensing elements based on direct-write, highly flexible piezoelectric polymeric nano/microfibers |
傅尹坤; Fuh, Yiin-Kuen; Chen, Po-Chou; Huang, Zih-Ming; Ho, Hsi-Chun |
|
| [機械工程學系] 期刊論文 |
2015-01-01 |
Superplastic forming process applied to aero-industrial strakelet: wrinkling, thickness, and microstructure analysis |
傅尹坤; Tang, Jung-Sung; Fuh, Yiin-Kuen; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2014-10-14 |
A highly flexible and substrate-independent self-powered deformation sensor based on massively aligned piezoelectric nano-/microfibers |
傅尹坤; Fuh, Yiin-Kuen; Ye, Jia-Cheng; Chen, Po-Chou; Huang, Zih-Ming |
|
| [機械工程學系] 期刊論文 |
2014-10-01 |
Direct-write, microfiber-based template for pattern transfer of aligned metallic microwires |
傅尹坤; Fuh, Yiin-Kuen; Lu, Hong-Yi |
|
| [機械工程學系] 期刊論文 |
2014-07-15 |
Characterization of a tunable astigmatic fluidic lens with adaptive optics correction for compact phoropter application |
傅尹坤; Fuh, Yiin-Kuen; Huang, Chieh-Tse |
|
| [機械工程學系] 期刊論文 |
2014-01-01 |
Electrical, mechanical and morphological properties of compressed carbon felt electrodes in vanadium redox flow battery |
傅尹坤; Chang, Tien-Chan; Zhang, Jun-Pu; Fuh, Yiin-Kuen |
|
| [機械工程學系] 期刊論文 |
2014-01-01 |
In situ roughness monitoring of sputtered Pt thin film under dynamic turbulence using adaptive optics |
傅尹坤; Fuh, Yiin Kuen; Wang, Chia He |
|
| [機械工程學系] 期刊論文 |
2013-09-01 |
A facile electrode pattern for voltage and current superposition of near-field electrospun piezoelectric nanogenerator |
傅尹坤; Fuh, Yiin-Kuen; Chen, Shao-Yu; Chia, Tai-Shin |
|
| [機械工程學系] 期刊論文 |
2013-09-01 |
Adaptive optics integrated surface roughness measurement of sputtered PT film on silicon substrate |
傅尹坤; Fuh, Yiin Kuen; Wang, Chia He |
|
| [機械工程學系] 期刊論文 |
2013-09-01 |
Controlled continuous tapering chitosan-poly(ethylene oxide) nanofibers using a differential voltage regulation in near-field electrospinning |
傅尹坤; Fuh, Yiin-Kuen; Chen, Sheng Zhan |
|
| [機械工程學系] 期刊論文 |
2013-09-01 |
Experimental investigation of a flowing fluid layer on metal surface roughness measurement and aberration correction using adaptive optics |
傅尹坤; Fuh, Yiin Kuen; Fan, Jia Ren |
|
| [機械工程學系] 期刊論文 |
2013-08-21 |
Electroless plating on porous carbon felts in redox flow batteries and thickness effect on the electrical and mechanical properties |
傅尹坤; Fuh, Yiin-Kuen; Chang, Tien-Chan; Zhang, Jun-Pu |
|
| [機械工程學系] 期刊論文 |
2013-08-01 |
Two-stage superplastic forming of a V-shaped aluminum sheet into a trough with deep and irregular contour |
傅尹坤; Lan, Hsien-Chin; Fuh, Yiin-Kuen; Lee, Shyong; Chu, Chun-Lin; Chang, Tien-Chan |
|
| [機械工程學系] 期刊論文 |
2013-07-26 |
Adaptive optics correction of a tunable fluidic lens for ophthalmic applications |
傅尹坤; Fuh, Yiin-Kuen; Lin, Ming-Xin |
|
| [機械工程學系] 期刊論文 |
2013-07-15 |
Massively parallel aligned microfibers-based harvester deposited via in situ, oriented poled near-field electrospinning |
傅尹坤; Fuh, Yiin-Kuen; Chen, Shao-Yu; Ye, Jia-Cheng |
|
| [機械工程學系] 期刊論文 |
2013-04-29 |
Hydrogen storage in iron/carbon nanopowder composite materials: Effect of varying spiked iron content on hydrogen adsorption |
傅尹坤; Fuh, Yiin-Kuen; Chen, Jiann-Ruey; Chang, Chia-Feng; Chu, Chun-Lin |
|
| [機械工程學系] 期刊論文 |
2013-04-01 |
Characterization of adjustable fluidic lenses and capability for aberration correction of defocus and astigmatism |
傅尹坤; Fuh, Yiin-Kuen; Hsu, Kuo-Chan; Lin, Ming-Xin; Fan, Jia-Ren |
|
| [機械工程學系] 期刊論文 |
2013-03-25 |
Adaptive optics assisted reconfigurable liquid-driven optical switch |
傅尹坤; Fuh, Yiin-Kuen; Huang, Wei-Chi |
|
| [機械工程學系] 期刊論文 |
2013-02-08 |
Pattern transfer of aligned metal nano/microwires as flexible transparent electrodes using an electrospun nanofiber template |
傅尹坤; Fuh, Yiin-Kuen; Lien, Li-Chih |
|
| [機械工程學系] 期刊論文 |
2013-01-01 |
In-process surface roughness measurement of bulk metallic glass using an adaptive optics system for aberration correction |
傅尹坤; Fuh, Yiin-Kuen; Fan, Jia Ren; Huang, Chung Yu; Jang, Shian Ching |
|
| [機械工程學系] 期刊論文 |
2013-01-01 |
Rapid replication and facile modulation of subwavelength antireflective polymer film using injection nanomolding and optical property of multilayer coatings |
傅尹坤; Fuh, Yiin-Kuen; Peng, Cheng-Chang; Huang, Chieh-Tse |
|
| [機械工程學系] 期刊論文 |
2012-12-01 |
Characterizing aberration of a pressure-actuated tunable biconvex microlens with a simple spherically-corrected design |
傅尹坤; Fuh, Yiin-Kuen; Lin, Ming-Xin; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-11-01 |
Self-organisation of multiple jets in near-field electrospinning process |
傅尹坤; Fuh, Yiin-Kuen; Lien, Li-Chih |
|
| [機械工程學系] 期刊論文 |
2012-10-01 |
Direct-write, well-aligned chitosan-poly(ethylene oxide) nanofibers deposited via near-field electrospinning |
傅尹坤; Fuh, Yiin-Kuen; Chen, Shengzhan; Jang, Jason S.C. |
|
| [機械工程學系] 期刊論文 |
2012-09-01 |
High-throughput production of nanofibrous mats via a porous materials electrospinning process |
傅尹坤; Fuh, Yiin-Kuen; Lien, Li-Chih; Chen, Shao-Yu |
|
| [機械工程學系] 期刊論文 |
2012-08-13 |
An oscillation-free actuation of fluidic lens for optical beam control |
傅尹坤; Lee, Shyong |
|
| [機械工程學系] 期刊論文 |
2012-07-01 |
Adjustable fluidic lenses for correcting piston/defocus/astigmatism aberrations induced by MEMS deformable mirrors |
傅尹坤; Fuh, Yiin-Kuen; Hsu, Kuo-Chan; Lin, Ming-Xin; Fan, Jia-Ren |
|
| [機械工程學系] 期刊論文 |
2012-04-01 |
Comparative study of polyvinylidene fluoride nanofibrous membranes prepared by continuous near-field and conventional electrospinning processes |
傅尹坤; Fuh, Yiin-Kuen; Lien, Li-Chih; Jang, Jason S.C. |
|
| [機械工程學系] 期刊論文 |
2012-03-01 |
Rapid in-process measurement of surface roughness using adaptive optics |
傅尹坤; Fuh, Yiin Kuen; Hsu, Kuo Chan; Fan, Jia Ren |
|
| [機械工程學系] 期刊論文 |
2012-03-01 |
Roughness measurement of metals using a modified binary speckle image and adaptive optics |
傅尹坤; Fuh, Yiin-Kuen; Hsu, Kuo Chan; Fan, Jia Ren |
|
| [機械工程學系] 期刊論文 |
2012-01-01 |
Ti-containing hydrogenated carbon films fabricated by high-power plasma magnetron sputtering |
傅尹坤 |
|
